VAULT® Options

Get even more out of VAULT® with these custom options

SDS

Satellite Dish Support (SDS)

Availability: Medium, Tall or Mega VAULT®

The SDS utilizes The VAULT® in combination with – one 1- 1/2” aluminum structural to support satellite dishes 40” diameter or less. This installation is accomplished with one side of the aluminum support being mechanically anchored to the roof inside the VAULT®, while the outside is supported by a non-penetration support which transfers less than 2.5 PSI to the roof structure. Choose the size VAULT® necessary to accommodate piping, conduit, cable or other penetrants in the same unit as the SDS.

*unistrut, fasteners and electrical disconnect or breaker box by others.

EDS

Electrical Disconnect Support (EDS)

Availability: Medium, Tall or Mega VAULT®

The EDS utilizes The VAULT® in combination with – two 1-1/4 aluminum structural uprights to support electrical supply boxes up to 500 lbs. This installation is accomplished by the uprights being mechanically anchored to the roof inside the VAULT®, and the uprights outside the VAULT® supported by non-penetration supports which transfer less than 2.5 PSI to the roof structure. Choose the size VAULT® necessary to accommodate cable, conduit, or piping penetrations, in the same unit as the EDS.

*unistrut, fasteners and electrical disconnect or breaker box by others.

Ductwork Option

MATS Duct photo1Availability: Mega or Custom VAULT®

Ductwork 90 ° elbow for penetration through the roof in conjunction with Mega or Custom Vault®.

Cable Guides

Allows the contractor to pull telecommunication fiber optics or bundled wiring without the use of long radius elbows.

NOTE: Factory engineering required for proper sizing.

Roller Guide

Request A Free Quote >