VAULT® Models

Choose one of the housing models below, or have us build you a custom model.

AWI Series Vault  |  AW Series Vault  | AL Series Vault  |  Custom Vault  |  Wall Vault

AWI Series Vault®

Cross-section of AWI Series Vault, with insulated extension.

  • 3rd Generation Model
  • Includes insulation extension (ICE)
  • Tested by 3rd party to comply with 2015 ICC Energy code C402, section ASTM E2178-11 and ASTM E2357-11.
  • Constructed of heavy gage powder coated welded aluminum with gaskets and stainless steel hardware.
  • Tested by the National Wind Institute to meet ICC-500 and FEMA 320/361.
  • Vandal resistant lid
  • Four-piece configuration consisting of a removable vandal resistant lid, middle housing, insulation extension (ICE) and wide flanged curb that is light weight and water tight
  • To be used with our exclusive two-piece aluminum and/or stainless steel flanged Exit Seal with SilX14TM gasket
  • 20-year insured, warranty

AWI MODELS

AWI SMALL VAULT®

Model: AWI161010

L-161/2” W-93/4” H-10”

Designed for small AC Condensing units up to 7 1/2 tons. Accommodates up to 1-5/8” OD pipes/conduit/ telecommunication cables. Designed for a power conduit, control conduit, liquid line and suction line.

AWI MEDIUM VAULT®

Model: AWI201412

L-20 1/2” W-14 1/2” H-12”

Accommodates multiple pipes/ conduit/telecommunication cables to the roof. Designed for 4 condensing units (two on each side).

AWI MEGA VAULT®

Model: AWI343424

L-34” W-34” H-24”

Allows for a wide variety of installation choices including; multiple AC units, larger pipe diameters or large electrical disconnects.

Request AWI Series VAULT

AW Series Vault® (Replacing AL Series)

  • 3rd Generation Model
  • Tested by 3rd party to comply with 2015 ICC Energy code C402, section ASTM E2178-11 and ASTM E2357-11.
  • Constructed of heavy gage powder coated welded aluminum with gaskets and stainless steel hardware.
  • Tested by the National Wind Institute to meet ICC-500 and FEMA 320/361.
  • Three-piece configuration consisting of a removable vandal resistant lid, middle housing and wide flanged curb that is light weight and water tight
  • To be used with our exclusive two-piece aluminum and/or stainless steel flanged Exit Seal with SilX14TM gasket
  • 20-year insured, warranty

AW MODELS

AW MINI-TOWER VAULT®Mini Tower Vault

Model: AW121022

L-12” W-10” H-22”

Designed for electrical power switch/ disconnects and small satellite dish mounts.

AW SMALL VAULT®Small Vault

Model: AW161010

L-161/2” W-93/4” H-10”

Designed for small AC Condensing units up to 7 1/2 tons. Accommodates up to 1-5/8” OD pipes/conduit/ telecommunication cables. Designed for a power conduit, control conduit, liquid line and suction line.

AW MEDIUM VAULT®Medium Vault

Model: AW201412

L-20 1/2” W-14 1/2” H-12”

Accommodates multiple pipes/ conduit/telecommunication cables to the roof. Designed for 4 condensing units (two on each side).

AW MEGA VAULT®Mega Vault

Model: AW343424

L-34” W-34” H-24”

Allows for a wide variety of installation choices including; multiple AC units, larger pipe diameters or large electrical disconnects.

Request AW Series VAULT

AL Series Vault®  (being replaced by AW Series)

  • 2nd Generation Model
  • Constructed of heavy gage powder coated welded aluminum with gaskets and stainless steel hardware.
  • Tested by the National Wind Institute to meet ICC-500 and FEMA 320/361.
  • Three-piece configuration consisting of a removable vandal resistant lid, middle housing and wide flanged curb that is light weight and water tight
  • To be used with our exclusive two-piece aluminum and/or stainless steel flanged Exit Seal with SilX14TM gasket
  • 20-year insured, warranty

NOTE: The AL Series is phasing out and being replaced by the AW Series

Request AL Series VAULT

Wells FargoCustom VAULT®

If you can’t find exactly what you need in our existing line of VAULT® models then we’ll work with you to build one that meets your precise needs. No job is too big. In fact, we’ve built custom VAULT® housings for everyone from airports to corporate headquarters.

  • Stainless Steel Assemblies Are Available
  • CAD Drawings Available for All Assemblies

Request Custom VAULT®

Wall Vault

wall-vault-small-2
Engineered product constructed of heavy gage powder coated welded aluminum with gaskets and stainless steel hardware. The three-piece configuration, consisting of a removable vandal resistant panel, frame for mounting onto various wall types and to be used with our exclusive two-piece aluminum and/or stainless steel flanged Exit Seal with SilX14™ gasket which comes with 20-year insured warranty. Allows for the electrical, cable, refrigeration lines, etc. to penetrate through a parapet or exterior wall. The Wall Vault® also allows for future penetrants if need be.

Request Wall VAULT

Notes:

  • All VAULT® Assemblies are Engineered All Aluminum pre-insulated (R4.3 @ 75F) and gasketed curb and housings with Vandal Resistant Cover & Stainless Steel screws.
  • Sizes given above are for Housing only. To calculate total size, add 11” for total height, 14” for curb, and 3” overlap
  • Exit Seal™ capacities are dependent on size of seals required
  • Products shown may not reflect current design refinements. Dimensions may vary.

CAD

Download CAD Drawings

To download VAULT CAD Drawings, you must submit your name and email below. The file link will then be emailed to you. By clicking 'Submit for Download' you are agreeing, under penalty of law, that you are not a competitor nor will you ever use or distribute in any way competitive, or without the express written consent of Roof Penetration Housings, LLC


VAULT Revit Drawings

revit

Revit drawings of our products are available by request. Click here to submit your request.

Or, they are available here thru Bimobject (previously Autodesk Seek)